How to custom printed black wristband,custom made lanyards

15 Views

ilicone wristband run a factory in China. Preferential policies and low labor cost is the main reason. A Chinese silicone wristband producing factory usually make the wristband from silicone but not producing silicone. They purchase raw material from all over the world so that make the silicone wristband low price. So Make In China is cheap and of high quatity as well. Guanddong and Zhejiang province is the two place famous for custom silicone wristband. Near 200 silicone wristband making factory located in Guanddong province. They provide tons of wristbands every day of all kinds like debossed, embossed and printed wristband. Silk screen printing is applied for printed silicone bracelets. Modern screen printing technology is making screen by photoengraving method using photosensitive material ,oil paintings, prints, posters, name card, binding covers, packaging, commodity, textile printing and dyeing, glass and metal plane carrier. And also this is the printing method for the printed silicone bracelets.  

black wristband

formance defects and practical function is reduced . Some customer are holding ready-made products for Soft-hardness comparison directly and then choose one of them . In nowadays the custom silicone bracelets is one of them. So how to choose the hardness for custom silicone bracelets . The choice of softness and hardness of silica gel wcustom made lanyardsill have different effects on the properties of different products . At present, the hardness of commonly used silica gel hand rings is between 40 degrees and 60 degrees and material with different hardness has certain difference . For example , the tensile rate of 40 degree materials will reach about 150% , and the tensile rate 60 degree materials can only reach about 80% . So in order to confirm the functionality of products , we have to test them . It is more difficult to produce high hardness silica gel hand rings . For the manufacturers of silica gel hand rings , the higher the hardness ,custom made lanyards the higher the defective rate of the products and the pulling force of the products will also be affected and will cause fracture phenomenon at any time . Therefore , we suggest that the hardness of the silica gel hand rings should not be too high .